FESTO DHPS-25-A 1254049 Parallel Gripper
The FESTO DHPS-25-A, part number 1254049, is a parallel gripper. Its exact-model datasheet lists mode of operation as Double-acting and operating pressure as 0.2 MPa … 0.8 MPa.
Description
FESTO DHPS-25-A 1254049 Parallel Gripper
The FESTO DHPS-25-A, part number 1254049, is a parallel gripper. Its exact-model datasheet lists mode of operation as Double-acting and operating pressure as 0.2 MPa … 0.8 MPa.
Key Features
- Mode of operation: Double-acting.
- Operating pressure: 0.2 MPa … 0.8 MPa.
- Size: 25.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DHPS-25-A |
| Part number | 1254049 |
| Product type | Parallel Gripper |
| Size | 25 |
| Stroke per gripper jaws | 7.5 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripper force back-up | None |
| Design | Lever Force pilot operated motion sequence |
| Guide | Plain-bearing guide |
| Position detection | Via proximity switch |
| Operating pressure | 0.2 MPa … 0.8 MPa |
| Operating pressure | 2 bar … 8 bar |
| Operating pressure | 29 psi … 116 psi |
| Max. operating frequency of gripper | 2 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 48 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 63 ms |
| Max. mass per external gripper finger | 350 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | 5 °C … 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 500 N |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) | 450 N |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 249 N |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | 228 N |
| Mass moment of inertia | 3.831 kgcm² |
| Max. force on gripper jaw Fz static | 350 N |
| Max. torque at gripper Mx static | 30 Nm |
| Max. torque at gripper My static | 30 Nm |
| Max. torque at gripper Mz static | 30 Nm |
| Lubrication interval for guide components | 10 MioCyc |
| Product weight | 700 g |
| Type of mounting | Either: Via female thread and centring sleeve Via through-hole and centring sleeve |
| Pneumatic connection | G1/8 |
| Material cover cap | PA |
| Material housing | Hard anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy stainless steel |
Application Notes
Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.
Selection and Installation
Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model DHPS-25-A, part number 1254049, quantity and destination. Clear photos of the existing item or package can help confirm the selection.
Exact-Model Datasheet Check
The Festo datasheet for DHPS-25-A, part number 1254049, confirms mode of operation as Double-acting. Check installation and connection details against the existing equipment before replacement.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DHPS-25-A |
| Part Number | 1254049 |
| Product Type | Parallel Gripper |
| Size | 25 |
| Stroke per gripper jaws | 7.5 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |





