FESTO DZF-25-50-P-A 164030 Flat Cylinder
The FESTO DZF-25-50-P-A, part number 164030, is a flat cylinder. Its exact-model datasheet lists piston diameter as 25 mm Equivalent diameter and stroke as 50 mm.
Description
FESTO DZF-25-50-P-A 164030 Flat Cylinder
The FESTO DZF-25-50-P-A, part number 164030, is a flat cylinder. Its exact-model datasheet lists piston diameter as 25 mm Equivalent diameter and stroke as 50 mm.
Key Features
- Piston diameter: 25 mm Equivalent diameter.
- Stroke: 50 mm.
- Mode of operation: Double-acting.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DZF-25-50-P-A |
| Part number | 164030 |
| Product type | Flat Cylinder |
| Stroke | 50 mm |
| Piston diameter | 25 mm Equivalent diameter |
| Piston rod thread | M5 |
| Torsional backlash at piston rod +/- | 1 deg |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Piston Piston rod |
| Position detection | Via proximity switch |
| Protection against torque/guide | Oval piston |
| Operating pressure | 0.1 MPa … 1 MPa |
| Operating pressure | 1 bar … 10 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 0.1 J |
| Max. torque for protection against torsion | 0.5 Nm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 247 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 295 N |
| Moving mass for 0 mm stroke | 40 g |
| Additional moving mass per 10 mm stroke | 6 g |
| Additional weight per 10 mm stroke | 18 g |
| Basic weight for 0 mm stroke | 168 g |
| Type of mounting | With female thread With accessories |
| Pneumatic connection | M5 |
| Material cover | Die-cast aluminium |
| Material seals | HNBR TPE-U(PU) |
| Material housing | Anodised wrought aluminium alloy |
| Material piston seal | NBR |
| Material piston rod | High-alloy stainless steel |
Application Notes
Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.
Selection and Installation
Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model DZF-25-50-P-A, part number 164030, quantity and destination. Clear photos of the existing item or package can help confirm the selection.
Exact-Model Datasheet Check
The Festo datasheet for DZF-25-50-P-A, part number 164030, confirms piston diameter as 25 mm Equivalent diameter. Check installation and connection details against the existing equipment before replacement.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | DZF-25-50-P-A |
| Part Number | 164030 |
| Product Type | Flat Cylinder |
| Stroke | 50 mm |
| Piston diameter | 25 mm Equivalent diameter |
| Piston rod thread | M5 |
| Torsional backlash at piston rod +/- | 1 deg |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Piston Piston rod |





