FESTO HGPT-63-A-B-G2 560230 Parallel Gripper

The FESTO HGPT-63-A-B-G2, part number 560230, is a parallel gripper. Its exact-model datasheet lists mode of operation as Double-acting and operating pressure as 4 bar … 8 bar.

SKU: 560230 Category: Tags: , , Brand:

Description

FESTO HGPT-63-A-B-G2 560230 Parallel Gripper

The FESTO HGPT-63-A-B-G2, part number 560230, is a parallel gripper. Its exact-model datasheet lists mode of operation as Double-acting and operating pressure as 4 bar … 8 bar.

Key Features

  • Mode of operation: Double-acting.
  • Operating pressure: 4 bar … 8 bar.
  • Size: 63.

Technical Data

Brand FESTO
Model HGPT-63-A-B-G2
Part number 560230
Product type Parallel Gripper
Size 63
Stroke per gripper jaws 16 mm
Max. replacement accuracy ≤0.2 mm
Max. angular gripper jaw backlash ax, ay ≤0.1 deg
Max. gripper jaw backlash Sz ≤0.02 mm
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper ≤0.05 mm
Number of gripper jaws 2
Drive system Pneumatic
Mounting position Any
Mode of operation Double-acting
Gripper function Parallel
Gripper force back-up During closing
Design Wedge-shaped drive Force pilot operated motion sequence
Position detection Via proximity switch
Operating pressure 4 bar … 8 bar
Operating pressure of blocked air 0 bar … 0.5 bar
Max. operating frequency of gripper ≤2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 294 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 185 ms
Max. mass per external gripper finger 1260 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Degree of protection IP40
Ambient temperature 5 °C … 60 °C
Mass moment of inertia 93.034 kgcm²
Max. force on gripper jaw Fz static 5000 N
Max. torque at gripper Mx static 160 Nm
Max. torque at gripper My static 180 Nm
Max. torque at gripper Mz static 140 Nm
Lubrication interval for guide components 5 MioCyc
Product weight 3562 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve Via through-hole and dowel pin Via female thread and dowel pin
Pneumatic connection, blocked air M5
Pneumatic connection G1/8
Material cover cap High-alloy stainless steel
Material housing Anodised aluminium
Material gripper jaws Hardened steel

Application Notes

Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.

Selection and Installation

Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.

Inquiry

For a quotation, provide model HGPT-63-A-B-G2, part number 560230, quantity and destination. Clear photos of the existing item or package can help confirm the selection.

Exact-Model Datasheet Check

The Festo datasheet for HGPT-63-A-B-G2, part number 560230, confirms mode of operation as Double-acting. Check installation and connection details against the existing equipment before replacement.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

HGPT-63-A-B-G2

Part Number

560230

Product Type

Parallel Gripper

Size

63

Stroke per gripper jaws

16 mm

Max. replacement accuracy

≤0.2 mm

Max. angular gripper jaw backlash ax, ay

≤0.1 deg

Max. gripper jaw backlash Sz

≤0.02 mm

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

≤0.05 mm

Number of gripper jaws

2