FESTO ADVU-32-40-P-A 156536 Compact Cylinder

The FESTO ADVU-32-40-P-A, part number 156536, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: ADVU-32-40-P-A Category: Tags: , , Brand:

Description

FESTO ADVU-32-40-P-A 156536 Compact Cylinder

The FESTO ADVU-32-40-P-A, part number 156536, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 40 mm.
  • Piston diameter: 32 mm.
  • Piston rod thread: M6.

Technical Data

Brand FESTO
Model ADVU-32-40-P-A
Part number 156536
Product type Compact Cylinder
Stroke 40 mm
Piston diameter 32 mm
Piston rod thread M6
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Mode of operation Double-acting
Piston-rod end Female thread
Design Piston Piston rod
Position detection Via proximity switch
Operating pressure 0.08 MPa … 1 MPa
Operating pressure 0.8 bar … 10 bar
Operating pressure 11.6 psi … 145 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.4 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 415 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 483 N
Moving mass for 0 mm stroke 49 g
Additional moving mass per 10 mm stroke 9 g
Basic weight for 0 mm stroke 300 g
Additional weight per 10 mm stroke 40 g
Type of mounting With through-hole With accessories
Pneumatic connection G1/8
Material collar screws Galvanised steel
Material cover Wrought aluminium alloy
Material dynamic seals NBR TPE-U(PU)
Material piston rod High-alloy stainless steel
Material cylinder barrel Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model ADVU-32-40-P-A, part number 156536, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies ADVU-32-40-P-A as a compact cylinder under part number 156536. It lists stroke as 40 mm. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting ADVU-32-40-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

ADVU-32-40-P-A

Part number

156536

Product type

Compact Cylinder

Stroke

40 mm

Piston diameter

32 mm

Piston rod thread

M6

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Mode of operation

Double-acting

Piston-rod end

Female thread

Design

Piston Piston rod