FESTO DHWS-25-A 1310180 Angle Gripper
The Festo DHWS-25-A (part number 1310180) is a angle gripper. Its product datasheet lists size as 25 and max. opening angle as 40 deg.
Description
FESTO DHWS-25-A 1310180 Angle Gripper
The Festo DHWS-25-A (part number 1310180) is a angle gripper. Its product datasheet lists size as 25 and max. opening angle as 40 deg.
Key Features
- Size: 25
- Max. opening angle: 40 deg
- Number of gripper jaws: 2
- Mode of operation: Double-acting
Technical Data
| Brand | FESTO |
|---|---|
| Model | DHWS-25-A |
| Part number | 1310180 |
| Size | 25 |
| Max. replacement accuracy | ≤0.2 mm |
| Max. opening angle | 40 deg |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | ≤0.04 mm |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Bracket |
| Design | Lever |
| Position detection | Via proximity switch |
| Operating pressure | 2 bar … 8 bar |
| Max. operating frequency of gripper | ≤3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 64 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 80 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Suitability for the production of Li-ion batteries | Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils. |
| Ambient temperature | 5 °C … 60 °C |
| Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening | 386 Ncm |
| Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) | 356 Ncm |
| Mass moment of inertia | 0.62 kgcm² |
| Max. force on gripper jaw Fz static | 90 N |
| Max. torque at gripper Mx static | 3.6 Nm |
| Max. torque at gripper My static | 3.6 Nm |
| Max. torque at gripper Mz static | 3.6 Nm |
| Product weight | 258 g |
| Type of mounting | Either: Via female thread and centring sleeve Via through-hole and centring sleeve |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Material cover cap | PA |
| Material housing | Wrought aluminium alloy Hard anodised |
| Material gripper jaws | High-alloy steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model DHWS-25-A, part number 1310180, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists number of gripper jaws as 2 for part number 1310180. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | DHWS-25-A |
| Part Number | 1310180 |
| Size | 25 |
| Max. replacement accuracy | ≤0.2 mm |
| Max. opening angle | 40 deg |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | ≤0.04 mm |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Mode of operation | Double-acting |









