IMI Norgren 0882327 Pressure Switch Marked 25 to 250 bar
The Norgren 0882327 nameplate marks a 25 to 250 bar pressure range and separately lists Pmax 400 bar.
Showing 33–48 of 385 results

The Norgren 0882327 nameplate marks a 25 to 250 bar pressure range and separately lists Pmax 400 bar.

Norgren 0883100 is a 5 to 70 bar 18D hydraulic switch with a flange process interface.

The Norgren 0883200 has a flange-mounted process inlet and a 10 to 160 bar hydraulic switching band.

IMI Norgren 1002/BG008 is an R1/4 relief valve with a manufacturer-coded 2 to 6.3 bar recommended operating band. The selector specifies with pull ring.

IMI Norgren 1002/BM000 is an R1/4 relief valve with a manufacturer-coded 0.14 to 1.6 bar recommended operating band. The selector specifies without pull ring.

IMI Norgren 100230804 is a metric reducing connector with an 8 mm outside-diameter stem and a push-in connection for 4 mm outside-diameter tubing. These are different interfaces, not two threaded ports.

The IMI Norgren 100600800 is an 8 mm Pneufit tee connector for branching a tube run. Confirm tubing outside diameter and branch layout before installation.

The IMI Norgren 100601000 is a 10 mm Pneufit tee connector for a metric tube branch. Verify tubing outside diameter and available installation clearance.

The IMI Norgren 100601200 is a 12 mm Pneufit tee connector for metric tubing. Check tube outside diameter and branch location before fitting.

IMI Norgren 101470628 connects 6 mm outside-diameter tubing to a R1/4 male-thread interface. The exact model row identifies this swivel elbow adaptor.

IMI Norgren 101680818 connects 8 mm outside-diameter tubing to a R1/8 male-thread interface. The exact model row identifies this swivel side tee adaptor.

IMI Norgren 101681248 connects 12 mm outside-diameter tubing to a R1/2 male-thread interface. The exact model row identifies this swivel side tee adaptor.

IMI Norgren 102250405 connects 4 mm outside-diameter tubing to a M5 male-thread interface. The exact model row identifies this internal-hex straight adaptor.

IMI Norgren 102251048 connects 10 mm outside-diameter tubing to a G1/2 male-thread interface. The exact model row identifies this straight adaptor.

IMI Norgren 102470428 connects 4 mm outside-diameter tubing to a G1/4 male-thread interface. The exact model row identifies this swivel elbow adaptor.

The IMI Norgren 1028063 is an XSz failure indication element for visual or electrical fault indication on compatible XSz safety valves. Confirm valve compatibility and connection requirements before installation.