FESTO DSBC-50-50-PPVA-N3 1366950 Iso Cylinder

The FESTO DSBC-50-50-PPVA-N3, part number 1366950, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DSBC-50-50-PPVA-N3 Category: Tags: , , Brand:

Description

FESTO DSBC-50-50-PPVA-N3 1366950 Iso Cylinder

The FESTO DSBC-50-50-PPVA-N3, part number 1366950, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 50 mm.
  • Piston diameter: 50 mm.
  • Piston rod thread: M16x1.5.

Technical Data

Brand FESTO
Model DSBC-50-50-PPVA-N3
Part number 1366950
Product type Iso Cylinder
Stroke 50 mm
Piston diameter 50 mm
Piston rod thread M16x1.5
Cushioning Pneumatic cushioning, adjustable at both ends
Mounting position Any
Piston-rod end Male thread
Design Piston Piston rod Profile barrel
Position detection Via proximity switch
Operating pressure 0.04 MPa … 1.2 MPa
Operating pressure 0.4 bar … 12 bar
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 1 J
Cushioning length 22 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 990 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 1178 N
Moving mass 490 g
Moving mass for 0 mm stroke 365 g
Additional moving mass per 10 mm stroke 25 g
Product weight 1470 g
Basic weight for 0 mm stroke 1190 g
Additional weight per 10 mm stroke 56 g
Type of mounting With female thread With accessories
Pneumatic connection G1/4
Material cover Coated die-cast aluminium
Material piston seal TPE-U(PU)
Material piston Wrought aluminium alloy
Material piston rod High-alloy steel
Material piston rod wiper TPE-U(PU)
Buffer seal material TPE-U(PU)
Material of cushioning boss POM
Material cylinder barrel Smooth-anodised wrought aluminium alloy
Material nut Galvanised steel
Material bearing POM
Material collar screws Galvanised steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DSBC-50-50-PPVA-N3, part number 1366950, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DSBC-50-50-PPVA-N3 as a iso cylinder under part number 1366950. It lists stroke as 50 mm. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DSBC-50-50-PPVA-N3

Part number

1366950

Product type

Iso Cylinder

Stroke

50 mm

Piston diameter

50 mm

Piston rod thread

M16x1.5

Cushioning

Pneumatic cushioning, adjustable at both ends

Mounting position

Any

Piston-rod end

Male thread

Design

Piston Piston rod Profile barrel

Position detection

Via proximity switch