FESTO HPV-14-20-A 529351 Feed Separator

The Festo HPV-14-20-A (part number 529351) is a feed separator. Its product datasheet lists stroke as 20 mm and piston diameter as 14 mm.

SKU: 529351 Category: Tags: , , Brand:

Description

FESTO HPV-14-20-A 529351 Feed Separator

The Festo HPV-14-20-A (part number 529351) is a feed separator. Its product datasheet lists stroke as 20 mm and piston diameter as 14 mm.

Key Features

  • Stroke: 20 mm
  • Piston diameter: 14 mm
  • Mode of operation: Double-acting
  • Operating pressure: 3 bar … 8 bar

Technical Data

Brand FESTO
Model HPV-14-20-A
Part number 529351
Stroke 20 mm
Piston diameter 14 mm
Max. replacement accuracy 0.3 mm
Max. stem backlash Sx 0.05 mm
Max. stem backlash Sz 0.03 mm
Max. angular gripper jaw backlash ax 0.12 deg
Max. angular gripper jaw backlash ay 0.2 deg
Max. angular gripper jaw backlash az 0.175 deg
Mounting of external fingers Through-hole
Cushioning No cushioning
Mounting position Any
Mode of operation Double-acting
Design Piston rod
Locking mechanism
Non-rotating
Position detection Via proximity switch
Half pulse 111.5 ms
Protection against torque/guide Square guide
Cycle time 223 ms
Minimum product distance due to proximity switches 54 mm … 59 mm
Proximity switch protrusion 14 mm … 22 mm
Operating pressure 3 bar … 8 bar
Advance time 0.03 ms … 0.07 ms
Return-stroke time 0.03 ms … 0.07 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Degree of protection IP40
Ambient temperature 5 °C … 60 °C
Max. tightening torque 2.9 Nm at M4
5.9 Nm with M5
Max. force on finger Fz static 100 N
Max. torque Mr at finger, static 5 Nm
Max. torque at finger Mx static 5 Nm
Max. torque at finger My static 5 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 75 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 90 N
Product weight 290 g
Max. mass per external gripper finger 150 g
alternative connections M5
Type of mounting With through-hole for M4 screw and centring sleeve
With female thread M5 and centring sleeve
Pneumatic connection M5
Note on materials RoHS compliant
Material end cap High-alloy steel
Material seals NBR
Material housing Wrought aluminium alloy
COMPCOTE-coated
Material piston rod High-alloy steel
Plunger material High-alloy steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model HPV-14-20-A, part number 529351, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists mode of operation as Double-acting for part number 529351. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

HPV-14-20-A

Part Number

529351

Stroke

20 mm

Piston diameter

14 mm

Max. replacement accuracy

0.3 mm

Max. stem backlash Sx

0.05 mm

Max. stem backlash Sz

0.03 mm

Max. angular gripper jaw backlash ax

0.12 deg

Max. angular gripper jaw backlash ay

0.2 deg

Max. angular gripper jaw backlash az

0.175 deg