Norgren 34D-P016G-DA1-AA 34D G1/4 IO-Link Pressure Sensor

34D-P016G-DA1-AA: 0-16 bar electronic pressure sensor with one PNP output, one analog output, configurable IO-Link and a four digit display.

Request a Quote

SKU: 34D-P016G-DA1-AA Category: Tags: , Brand:

Description

The 34D-P016G-DA1-AA combines local pressure indication with programmable switching and analog output for pneumatic, hydraulic and compatible process fluid systems. Its upper body rotates through 345 degrees relative to the process connection to align the display after installation.

Request a Quote

Selection Notes for 34D-P016G-DA1-AA

Use the G1/4 process connection with media compatible with 316L stainless steel, alumina ceramic and FKM. Check 18-30 V DC supply, output requirements and the M12 pin assignment before connection.

Exact measuring and output configuration

Parameter Value
Pressure range 0-16 bar (0-232 psi)
Pressure type Relative pressure
Process connection G1/4
Output configuration 1 PNP and 1 analog
Communication IO-Link configurable
Maximum test pressure 85 bar; not an operating pressure
Connector M12 x 1

Electrical and environmental conditions

Parameter Value
Supply 18-30 V DC; reverse polarity protected
Current consumption Less than 35 mA
Permissible residual ripple 10% within supply limits
Switching time Less than 3 ms
Ambient and media temperature -25 to +80 C
Protection IP67 with plug mounted
Total accuracy +/-0.5% of full scale, excluding temperature sensitivity
Linearity +/-0.25% plus 1 display step
Weight 0.26 kg

Installation dimensions

Parameter Value
Overall height 90.7 mm
Body width 34 mm
Side envelope 49.4 mm
Process connection G1/4 female
Connection wrench size 30 mm
Electrical connector M12 x 1

Programmable pressure monitoring

Switching and reset points are adjustable over 0 to 100% of full scale, with a minimum difference of 0.5% of full scale. Hysteresis or window operation can be selected for each output, and normally open or normally closed switching logic is programmable. On and off delays are adjustable from 0 to 50 seconds.

Display and media compatibility

The four digit alphanumeric display supports bar, psi and MPa units with programmable red or green indication at the setpoint. Wetted parts are 316L stainless steel, alumina ceramic and FKM. The upper body can rotate 345 degrees to improve visibility without disturbing the process connection.

Installation envelope

The pressure sensor is 90.7 mm high and 34 mm wide, with a 49.4 mm side envelope to the M12 connection. The G1/4 process connection uses a 30 mm wrench size. Maintain access for the mating plug, seal the process interface correctly and install the plug before relying on IP67 protection.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

34D-P016G-DA1-AA

Measuring range

0-16 bar

Process connection

G1/4

Output

1 PNP and 1 analog; IO-Link configurable

Supply voltage

18-30 V DC

Protection

IP67 with plug mounted