FESTO DHWS-25-A 1310180 Angle Gripper

The Festo DHWS-25-A (part number 1310180) is a angle gripper. Its product datasheet lists size as 25 and max. opening angle as 40 deg.

SKU: 1310180 Category: Tags: , , Brand:

Description

FESTO DHWS-25-A 1310180 Angle Gripper

The Festo DHWS-25-A (part number 1310180) is a angle gripper. Its product datasheet lists size as 25 and max. opening angle as 40 deg.

Key Features

  • Size: 25
  • Max. opening angle: 40 deg
  • Number of gripper jaws: 2
  • Mode of operation: Double-acting

Technical Data

Brand FESTO
Model DHWS-25-A
Part number 1310180
Size 25
Max. replacement accuracy ≤0.2 mm
Max. opening angle 40 deg
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper ≤0.04 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Bracket
Design Lever
Position detection Via proximity switch
Operating pressure 2 bar … 8 bar
Max. operating frequency of gripper ≤3 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 64 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 80 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Suitability for the production of Li-ion batteries Metals with more than 5% by mass of copper are excluded from use.
Exceptions are printed circuit boards, cables, electrical connectors and
coils.
Ambient temperature 5 °C … 60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening 386 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) 356 Ncm
Mass moment of inertia 0.62 kgcm²
Max. force on gripper jaw Fz static 90 N
Max. torque at gripper Mx static 3.6 Nm
Max. torque at gripper My static 3.6 Nm
Max. torque at gripper Mz static 3.6 Nm
Product weight 258 g
Type of mounting Either:
Via female thread and centring sleeve
Via through-hole and centring sleeve
Pneumatic connection M5
Note on materials RoHS compliant
Material cover cap PA
Material housing Wrought aluminium alloy
Hard anodised
Material gripper jaws High-alloy steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DHWS-25-A, part number 1310180, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists number of gripper jaws as 2 for part number 1310180. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DHWS-25-A

Part Number

1310180

Size

25

Max. replacement accuracy

≤0.2 mm

Max. opening angle

40 deg

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

≤0.04 mm

Number of gripper jaws

2

Mounting position

Any

Mode of operation

Double-acting