FESTO HGPM-12-EO-G9 197567 Parallel Gripper
The Festo HGPM-12-EO-G9 (part number 197567) is a parallel gripper. Its product datasheet lists size as 12 and stroke per gripper jaws as 3 mm.
Description
FESTO HGPM-12-EO-G9 197567 Parallel Gripper
The Festo HGPM-12-EO-G9 (part number 197567) is a parallel gripper. Its product datasheet lists size as 12 and stroke per gripper jaws as 3 mm.
Key Features
- Size: 12
- Stroke per gripper jaws: 3 mm
- Number of gripper jaws: 2
- Mode of operation: Single-acting Open
Technical Data
| Brand | FESTO |
|---|---|
| Model | HGPM-12-EO-G9 |
| Part number | 197567 |
| Size | 12 |
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.03 mm |
| Rotationally symmetrical | 0.15 mm |
| Repetition accuracy, gripper | ≤0.05 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mode of operation | Single-acting Open |
| Gripper function | Parallel |
| Gripper force back-up | None |
| Design | Wedge-shaped drive |
| Position detection | None |
| Operating pressure | 4 bar … 8 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 11 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 3.7 ms |
| Max. mass per external gripper finger | 15 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | 5 °C … 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 27 N |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | 13.5 N |
| Mass moment of inertia | 0.07939 kgcm² |
| Max. force on gripper jaw Fz static | 30 N |
| Max. torque at gripper Mx static | 0.5 Nm |
| Max. torque at gripper My static | 0.5 Nm |
| Max. torque at gripper Mz static | 0.5 Nm |
| Product weight | 62 g |
| Type of mounting | With female thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Material cover cap | POM |
| Material housing | Anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model HGPM-12-EO-G9, part number 197567, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists number of gripper jaws as 2 for part number 197567. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Replacement Compatibility
Before ordering FESTO HGPM-12-EO-G9 197567 Parallel Gripper as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | HGPM-12-EO-G9 |
| Part Number | 197567 |
| Size | 12 |
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.03 mm |
| Rotationally symmetrical | 0.15 mm |
| Repetition accuracy, gripper | ≤0.05 mm |
| Number of gripper jaws | 2 |









