FESTO HPV-14-20-A 529351 Feed Separator
The Festo HPV-14-20-A (part number 529351) is a feed separator. Its product datasheet lists stroke as 20 mm and piston diameter as 14 mm.
Description
FESTO HPV-14-20-A 529351 Feed Separator
The Festo HPV-14-20-A (part number 529351) is a feed separator. Its product datasheet lists stroke as 20 mm and piston diameter as 14 mm.
Key Features
- Stroke: 20 mm
- Piston diameter: 14 mm
- Mode of operation: Double-acting
- Operating pressure: 3 bar … 8 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | HPV-14-20-A |
| Part number | 529351 |
| Stroke | 20 mm |
| Piston diameter | 14 mm |
| Max. replacement accuracy | 0.3 mm |
| Max. stem backlash Sx | 0.05 mm |
| Max. stem backlash Sz | 0.03 mm |
| Max. angular gripper jaw backlash ax | 0.12 deg |
| Max. angular gripper jaw backlash ay | 0.2 deg |
| Max. angular gripper jaw backlash az | 0.175 deg |
| Mounting of external fingers | Through-hole |
| Cushioning | No cushioning |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Piston rod Locking mechanism Non-rotating |
| Position detection | Via proximity switch |
| Half pulse | 111.5 ms |
| Protection against torque/guide | Square guide |
| Cycle time | 223 ms |
| Minimum product distance due to proximity switches | 54 mm … 59 mm |
| Proximity switch protrusion | 14 mm … 22 mm |
| Operating pressure | 3 bar … 8 bar |
| Advance time | 0.03 ms … 0.07 ms |
| Return-stroke time | 0.03 ms … 0.07 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Degree of protection | IP40 |
| Ambient temperature | 5 °C … 60 °C |
| Max. tightening torque | 2.9 Nm at M4 5.9 Nm with M5 |
| Max. force on finger Fz static | 100 N |
| Max. torque Mr at finger, static | 5 Nm |
| Max. torque at finger Mx static | 5 Nm |
| Max. torque at finger My static | 5 Nm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 75 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 90 N |
| Product weight | 290 g |
| Max. mass per external gripper finger | 150 g |
| alternative connections | M5 |
| Type of mounting | With through-hole for M4 screw and centring sleeve With female thread M5 and centring sleeve |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Material end cap | High-alloy steel |
| Material seals | NBR |
| Material housing | Wrought aluminium alloy COMPCOTE-coated |
| Material piston rod | High-alloy steel |
| Plunger material | High-alloy steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model HPV-14-20-A, part number 529351, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists mode of operation as Double-acting for part number 529351. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | HPV-14-20-A |
| Part Number | 529351 |
| Stroke | 20 mm |
| Piston diameter | 14 mm |
| Max. replacement accuracy | 0.3 mm |
| Max. stem backlash Sx | 0.05 mm |
| Max. stem backlash Sz | 0.03 mm |
| Max. angular gripper jaw backlash ax | 0.12 deg |
| Max. angular gripper jaw backlash ay | 0.2 deg |
| Max. angular gripper jaw backlash az | 0.175 deg |









