FESTO AEVC-12-5-I-P-A 188080 Short-Stroke Cylinder

The FESTO AEVC-12-5-I-P-A, part number 188080, is a short-stroke cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: AEVC-12-5-I-P-A Category: Tags: , , Brand:

Description

FESTO AEVC-12-5-I-P-A 188080 Short-Stroke Cylinder

The FESTO AEVC-12-5-I-P-A, part number 188080, is a short-stroke cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 5 mm.
  • Piston diameter: 12 mm.
  • Spring return force with retracted piston rod: 4 N.

Technical Data

Brand FESTO
Model AEVC-12-5-I-P-A
Part number 188080
Product type Short-Stroke Cylinder
Stroke 5 mm
Piston diameter 12 mm
Spring return force with retracted piston rod 4 N
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Mode of operation Pushing Single-acting
Design Piston Piston rod
Position detection Via proximity switch
Operating pressure 0.15 MPa…1 MPa 1.5 bar…10 bar 21.75 psi…145 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -20 °C…80 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 59 N
Moving mass 8.4 g
Product weight 51 g
Type of mounting Either: With through-hole With accessories
Pneumatic connection M5
Material cover Wrought aluminium alloy Anodised
Material seals TPE-U(PU)
Material housing Wrought aluminium alloy Anodised
Material piston rod High-alloy steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model AEVC-12-5-I-P-A, part number 188080, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies AEVC-12-5-I-P-A as a short-stroke cylinder under part number 188080. It lists stroke as 5 mm. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting AEVC-12-5-I-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

AEVC-12-5-I-P-A

Part number

188080

Product type

Short-Stroke Cylinder

Stroke

5 mm

Piston diameter

12 mm

Spring return force with retracted piston rod

4 N

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

optional

Mode of operation

Pushing Single-acting

Design

Piston Piston rod

Position detection

Via proximity switch