FESTO DSBC-63-500-PPVA-N3 1383589 Iso Cylinder

The FESTO DSBC-63-500-PPVA-N3, part number 1383589, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DSBC-63-500-PPVA-N3 Category: Tags: , , Brand:

Description

FESTO DSBC-63-500-PPVA-N3 1383589 Iso Cylinder

The FESTO DSBC-63-500-PPVA-N3, part number 1383589, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 500 mm.
  • Piston diameter: 63 mm.
  • Piston rod thread: M16x1.5.

Technical Data

Brand FESTO
Model DSBC-63-500-PPVA-N3
Part number 1383589
Product type Iso Cylinder
Stroke 500 mm
Piston diameter 63 mm
Piston rod thread M16x1.5
Cushioning Pneumatic cushioning, adjustable at both ends
Mounting position Any
Piston-rod end Male thread
Design Piston Piston rod Profile barrel
Position detection Via proximity switch
Operating pressure 0.04 MPa … 1.2 MPa
Operating pressure 0.4 bar … 12 bar
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 1.3 J
Cushioning length 22 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 1682 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 1870 N
Moving mass 1680 g
Moving mass for 0 mm stroke 430 g
Additional moving mass per 10 mm stroke 25 g
Product weight 4840 g
Basic weight for 0 mm stroke 1740 g
Additional weight per 10 mm stroke 62 g
Type of mounting With female thread With accessories
Pneumatic connection G3/8
Material cover Coated die-cast aluminium
Material piston seal TPE-U(PU)
Material piston Wrought aluminium alloy
Material piston rod High-alloy steel
Material piston rod wiper TPE-U(PU)
Buffer seal material TPE-U(PU)
Material of cushioning boss POM
Material cylinder barrel Smooth-anodised wrought aluminium alloy
Material nut Galvanised steel
Material bearing POM
Material collar screws Galvanised steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DSBC-63-500-PPVA-N3, part number 1383589, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DSBC-63-500-PPVA-N3 as a iso cylinder under part number 1383589. It lists stroke as 500 mm. Confirm the full variant before ordering.

Full Model Verification

Use the full model code when confirming FESTO DSBC-63-500-PPVA-N3 1383589 Iso Cylinder. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

DSBC-63-500-PPVA-N3

Part number

1383589

Product type

Iso Cylinder

Stroke

500 mm

Piston diameter

63 mm

Piston rod thread

M16x1.5

Cushioning

Pneumatic cushioning, adjustable at both ends

Mounting position

Any

Piston-rod end

Male thread

Design

Piston Piston rod Profile barrel

Position detection

Via proximity switch