FESTO DSNU-20-25-PPV-A 33974 Iso Cylinder
The FESTO DSNU-20-25-PPV-A, part number 33974, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSNU-20-25-PPV-A 33974 Iso Cylinder
The FESTO DSNU-20-25-PPV-A, part number 33974, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 25 mm.
- Piston diameter: 20 mm.
- Piston rod thread: M8.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSNU-20-25-PPV-A |
| Part number | 33974 |
| Product type | Iso Cylinder |
| Stroke | 25 mm |
| Piston diameter | 20 mm |
| Piston rod thread | M8 |
| Cushioning | Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Cylinder barrel |
| Position detection | Via proximity switch |
| Operating pressure | 0.1 MPa … 1 MPa |
| Operating pressure | 1 bar … 10 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 0.2 J |
| Cushioning length | 15 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 158.3 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 188.5 N |
| Moving mass for 0 mm stroke | 44 g |
| Additional moving mass per 10 mm stroke | 4 g |
| Basic weight for 0 mm stroke | 186.8 g |
| Additional weight per 10 mm stroke | 7.2 g |
| Type of mounting | With accessories |
| Pneumatic connection | G1/8 |
| Material cover | Wrought aluminium alloy Colourless anodised |
| Material seals | NBR TPE-U(PU) |
| Material piston rod | High-alloy stainless steel |
| Material cylinder barrel | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSNU-20-25-PPV-A, part number 33974, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSNU-20-25-PPV-A as a iso cylinder under part number 33974. It lists stroke as 25 mm. Confirm the full variant before ordering.
Replacement Compatibility
Before ordering FESTO DSNU-20-25-PPV-A 33974 Iso Cylinder as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSNU-20-25-PPV-A |
| Part number | 33974 |
| Product type | Iso Cylinder |
| Stroke | 25 mm |
| Piston diameter | 20 mm |
| Piston rod thread | M8 |
| Cushioning | Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Cylinder barrel |
| Position detection | Via proximity switch |






