FESTO DSM-10-90-P-A-FW 185943 Semi-Rotary Drive
The FESTO DSM-10-90-P-A-FW, part number 185943, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSM-10-90-P-A-FW 185943 Semi-Rotary Drive
The FESTO DSM-10-90-P-A-FW, part number 185943, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: 10.
- Cushioning angle: 0.5 deg.
- Swivel angle: 0 deg … 90 deg.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSM-10-90-P-A-FW |
| Part number | 185943 |
| Product type | Semi-Rotary Drive |
| Size | 10 |
| Cushioning angle | 0.5 deg |
| Swivel angle | 0 deg … 90 deg |
| Permissible stop radius | ≥13 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Vane |
| Position detection | Via proximity switch |
| Operating pressure | 0.25 MPa … 0.8 MPa |
| Operating pressure | 2.5 bar … 8 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 3 Hz |
| Repetition accuracy | 1 deg |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Ambient temperature | 0 °C … 60 °C |
| Max. stop force | 60 N |
| Max. axial force | 10 N |
| Max. radial force | 30 N |
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 0.85 Nm |
| Permissible mass moment of inertia | 0.0026 kgm² |
| Product weight | 159 g |
| Type of mounting | With female thread |
| Pneumatic connection | M3 |
| Material drive shaft | High-alloy stainless steel |
| Material seals | TPE-U(PU) |
| Material housing | anodised |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSM-10-90-P-A-FW, part number 185943, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSM-10-90-P-A-FW as a semi-rotary drive under part number 185943. It lists size as 10. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSM-10-90-P-A-FW |
| Part number | 185943 |
| Product type | Semi-Rotary Drive |
| Size | 10 |
| Cushioning angle | 0.5 deg |
| Swivel angle | 0 deg … 90 deg |
| Permissible stop radius | ≥13 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Vane |





