FESTO ADVU-40-30-A-P-A-S6 156095 Compact Cylinder

The FESTO ADVU-40-30-A-P-A-S6, part number 156095, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: ADVU-40-30-A-P-A-S6 Category: Tags: , , Brand:

Description

FESTO ADVU-40-30-A-P-A-S6 156095 Compact Cylinder

The FESTO ADVU-40-30-A-P-A-S6, part number 156095, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Piston diameter: 40 mm.
  • Cushioning: Elastic cushioning rings/plates at both ends.
  • Mounting position: optional.

Technical Data

Brand FESTO
Model ADVU-40-30-A-P-A-S6
Part number 156095
Product type Compact Cylinder
Piston diameter 40 mm
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Mode of operation Double-acting
Piston-rod end Male thread
Design Piston Piston rod
Position detection Via proximity switch
Operating pressure 0.08 MPa…1 MPa 0.8 bar…10 bar 11.6 psi…145 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature 0 °C…120 °C
Impact energy in end positions 0.52 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 686 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 754 N
Moving mass for 0 mm stroke 63 g
Additional moving mass per 10 mm stroke 9 g
Basic weight for 0 mm stroke 433 g
Additional weight per 10 mm stroke 59 g
Type of mounting Either: With through-hole With accessories
Pneumatic connection G1/8
Material collar screws Galvanised steel
Material cover Wrought aluminium alloy
Material dynamic seals FPM
Material piston rod High-alloy steel
Material cylinder barrel Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model ADVU-40-30-A-P-A-S6, part number 156095, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies ADVU-40-30-A-P-A-S6 as a compact cylinder under part number 156095. It lists piston diameter as 40 mm. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

ADVU-40-30-A-P-A-S6

Part number

156095

Product type

Compact Cylinder

Piston diameter

40 mm

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

optional

Mode of operation

Double-acting

Piston-rod end

Male thread

Design

Piston Piston rod

Position detection

Via proximity switch

Operating pressure

0.08 MPa…1 MPa 0.8 bar…10 bar 11.6 psi…145 psi