FESTO DHPS-10-A 1254040 Parallel Gripper

The FESTO DHPS-10-A, part number 1254040, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DHPS-10-A Category: Tags: , , Brand:

Description

FESTO DHPS-10-A 1254040 Parallel Gripper

The FESTO DHPS-10-A, part number 1254040, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 10.
  • Stroke per gripper jaws: 3 mm.
  • Max. replacement accuracy: ≤0.2 mm.

Technical Data

Brand FESTO
Model DHPS-10-A
Part number 1254040
Product type Parallel Gripper
Size 10
Stroke per gripper jaws 3 mm
Max. replacement accuracy ≤0.2 mm
Max. angular gripper jaw backlash ax, ay <0.5 deg
Max. gripper jaw backlash Sz <0.02 mm
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper <0.02 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Parallel
Design Lever Force pilot operated motion sequence
Guide Plain-bearing guide
Position detection Via proximity switch
Operating pressure 0.2 MPa … 0.8 MPa
Operating pressure 2 bar … 8 bar
Operating pressure 29 psi … 116 psi
Max. operating frequency of gripper 4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 21 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 28 ms
Max. mass per external gripper finger 60 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature 5 °C … 60 °C
Total gripping force, opening, 0.6MPa (6bar, 87 psi) 80 N
Total gripping force, closing, 0.6MPa (6bar, 87 psi) 70 N
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) 39 N
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) 34.5 N
Mass moment of inertia 0.079 kgcm²
Max. force on gripper jaw Fz static 60 N
Max. torque at gripper Mx static 3 Nm
Max. torque at gripper My static 3 Nm
Max. torque at gripper Mz static 3 Nm
Lubrication interval for guide components 10 MioCyc
Product weight 67 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve
Pneumatic connection M3
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DHPS-10-A, part number 1254040, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DHPS-10-A as a parallel gripper under part number 1254040. It lists size as 10. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DHPS-10-A

Part number

1254040

Product type

Parallel Gripper

Size

10

Stroke per gripper jaws

3 mm

Max. replacement accuracy

≤0.2 mm

Max. angular gripper jaw backlash ax, ay

<0.5 deg

Max. gripper jaw backlash Sz

<0.02 mm

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

<0.02 mm

Number of gripper jaws

2