FESTO DHPS-20-A-NC 1254048 Parallel Gripper
The FESTO DHPS-20-A-NC, part number 1254048, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DHPS-20-A-NC 1254048 Parallel Gripper
The FESTO DHPS-20-A-NC, part number 1254048, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: 20.
- Stroke per gripper jaws: 6.5 mm.
- Max. replacement accuracy: ≤0.2 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DHPS-20-A-NC |
| Part number | 1254048 |
| Product type | Parallel Gripper |
| Size | 20 |
| Stroke per gripper jaws | 6.5 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripper force back-up | During closing |
| Design | Lever Force pilot operated motion sequence |
| Guide | Plain-bearing guide |
| Position detection | Via proximity switch |
| Operating pressure | 0.4 MPa … 0.8 MPa |
| Operating pressure | 4 bar … 8 bar |
| Operating pressure | 58 psi … 116 psi |
| Max. operating frequency of gripper | 3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 72 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 62 ms |
| Max. mass per external gripper finger | 250 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | 5 °C … 60 °C |
| Mass moment of inertia | 1.494 kgcm² |
| Max. force on gripper jaw Fz static | 250 N |
| Max. torque at gripper Mx static | 14 Nm |
| Max. torque at gripper My static | 14 Nm |
| Max. torque at gripper Mz static | 14 Nm |
| Lubrication interval for guide components | 10 MioCyc |
| Product weight | 387 g |
| Type of mounting | Either: Via female thread and centring sleeve Via through-hole and centring sleeve |
| Pneumatic connection | M5 |
| Material cover cap | PA |
| Material housing | Hard anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DHPS-20-A-NC, part number 1254048, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DHPS-20-A-NC as a parallel gripper under part number 1254048. It lists size as 20. Confirm the full variant before ordering.
Application Review
When considering this parallel gripper for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | DHPS-20-A-NC |
| Part number | 1254048 |
| Product type | Parallel Gripper |
| Size | 20 |
| Stroke per gripper jaws | 6.5 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |






