Showing 65–80 of 1549 results
-

The Festo CMMO-ST-C5-1-LKP is a motor controller for use as a position controller. The datasheet identifies a 24 V DC load supply, 5.7 A nominal output current, and communication options including Ethernet and IO-Link.
-

The Festo CMMP-AS-C10-11A-P3 is a motor controller for servo motors. The datasheet identifies a three-phase 400 V AC nominal operating supply, 10 A nominal output current, and a 6,000 VA nominal controller power.
-

The Festo CMMP-AS-C2-3A is a motor controller for servo motors. Its datasheet lists a single-phase 230 V AC nominal operating supply, 2.5 A nominal output current, and 500 VA nominal controller power.
-

The Festo CMMP-AS-C2-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 2.5 A nominal output current. The M0 datasheet lists USB and Ethernet parameterisation interfaces.
-

The Festo CMMP-AS-C2-3A-M3 is a single-phase motor controller with a 230 V AC nominal operating voltage and 2.5 A nominal output current. The M3 datasheet lists several fieldbus link options.
-

The Festo CMMP-AS-C5-3A is a motor controller for servo motors. Despite the product folder wording, the datasheet identifies it as a motor controller with a single-phase 230 V AC nominal supply and 5 A nominal output current.
-

The Festo CMMP-AS-C5-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 5 A nominal output current. Its datasheet lists USB and Ethernet parameterisation interfaces.
-

The Festo CMMS-AS-C4-3A is a motor controller for servo motors. The datasheet lists a single-phase 230 V AC nominal operating voltage, 4 A nominal output current, and 600 VA nominal controller power.
-

The Festo CMMS-AS-C4-3A-G2 is a motor controller for servo motors. Its datasheet specifies a single-phase 230 V AC nominal supply, 4 A nominal output current, 600 VA nominal controller power and safe torque off (STO).
-

The Festo CMMS-ST-C8-7 is a motor controller for a stepper motor. The datasheet lists a 48 V DC nominal load supply, 8 A nominal load-supply current and a separate 24 V DC logic supply.
-

The Festo CMMS-ST-C8-7-G2 is a motor controller with a 48 V DC nominal load supply and 24 V DC nominal logic supply. Its datasheet lists an 8 A nominal load-supply current and encoder-based position sensing.
-

The Festo CMMT-AS-C2-3A-EC-S1 is a servo drive with a single-phase 230 V AC nominal operating supply. The datasheet lists 2 A effective nominal current per phase and an EtherCAT fieldbus interface.
-

The Festo CMMT-AS-C3-11A-P3-MP-S1 is a servo drive with a three-phase 400 V AC nominal supply. The datasheet lists 2.5 A effective nominal current per phase and a 24 V DC logic supply.
-

The Festo CMMT-AS-C4-3A-EP-S1 is a servo drive with a single-phase 230 V AC nominal supply. Its datasheet lists 4 A effective nominal current per phase, 700 W nominal controller power and a 24 V DC logic supply.
-

The Festo CMMT-AS-C5-11A-P3-MP-S1 is a servo drive with a three-phase 400 V AC nominal supply. Its datasheet lists 5 A effective nominal current per phase and a 24 V DC logic supply.
-

The Festo CMMT-AS-C5-11A-P3-PN-S1 is a servo drive with a three-phase 400 V AC nominal supply. The datasheet lists 5 A effective nominal current per phase and a PROFINET fieldbus interface.